Today laminate is gaining more and more popularity. This is explained by the miraculous, callous look of the surface, which imitates a natural tree, the ease of installation is paired with a low price of this material. Ale navіt nayakіsnіshiy mateіlіy hour need repair. Is it possible to restore a laminate with your own hands? Let's take a look at the basics of the poshkodzhen tsgogo pіdlogovogo pokrittya that way їх usunennya.

Often it is not necessary to overhaul all sublogs, to turn the laminate to its original appearance. A lot of defects can be corrected with minimal financial investments. Most often during operation, the following defects appear on the laminate flooring:

• gaps;
• podryapini;
• cracks;
• how much;
• swelling
• spit.

Causes of blame for these defects are different, and in order to correctly carry out the restoration and prevent repeated restoration, it is necessary to examine in more detail in this nutrition.

How to damage the laminate and how to fix a defect.

Schilini

As soon as we finished the overhaul and laid a new laminate floor, and later we began to notice that there are gaps between the boards, the reason for such a defect lies in the damaged laying technology. You can use:

• inaccurate preparation of the basis of pidlog;
• vikoristannya over a thin or non-stained lining;
• the presence of a damper gap between the wall and the covering.

The base of the log was prepared incorrectly

The base of the laminate can be absolutely smooth. In another turn of the log, the back begins to ripple, and then the cracks between the rimmed lamellas are established. In addition, great unevenness can lead to a distortion of the surface.

It is possible to remove the entire laminate flooring, clean the surface of the base, lay a new lining, and then re-install the coating, but such a repair will be associated with large amounts of work and additional financial investments. Even if the defects are not rich enough fahivtsі to heal for the usunennya shchilin skoristatisya with a special sealant.

The slots are thoroughly cleaned from the wood and the saw, and then filled with sealant with the help of a special humic spatula. The term hangover is indicated by the picker on the packaging. After hanging an uneven seam, you can fix it with a bud knife.

Well, well, it’s rich and it’s good to see that the surface of the underlay is uneven, it will happen to dismantle the underlay and after the usunennya is not enough to lay it again.

Fuck you! Schob laminatna pіdloga bula mіtsnіshoy, majstri radyat pіd hour installation vikoristovuvat glue or screws.

Podryapini

The greatest extensions of the type are not only on laminates, but also on any other sub-logic cover. The reason for such a defect can be buti gostrі pіdbori, pazury of domestic creatures, rearrangement of important objects (furniture or equipment) and more.

Undercutting - the defect in the laminate is most often repaired

They cut deep and superficial underwear. It is even more important to fix the defect at the cob stage, until the stubble has become a big and big one. The best podryapin to shove the vologer and the rubbish that deeply destroys the material in every respect.

Laminate repair at times does not mean great difficulties. Get out of the problem to help the special wax olive. They clean the undercoat well and dry it, and then carefully fill it with wax for the help of the olive. After hanging with the instructions of the virobnik, the surface should be polished with soft ganchirochka.

For usunennya small podryapin zastosovuyut wax olive, and more deep podryapiny, cracks that how much sealant.

Fuck you! When changing the furniture on the laminate flooring, put on the bottom of the soft lining, so that the underpinning and chipping on the underlayment cover can be hidden.

Cracks and how much

It is also necessary to make wider defects on the laminate. As a rule, the stench settles down at the hour of the fall on the ground of important objects. For usunennya skolіv and trіshchin sold special warehouse. Їm to repair defects and for the help of a humic spatula. The surface of the underlays is immediately cleared in the form of a sum of money. After a complete hang-up, if necessary, the process is repeated until the end, until the warehouse stops settling and the surface becomes flat without a crack.

Zam_st spets_alnogo repair warehouse can vikoristat acrylic sealant. Fakhіvtsі to take the sealant to the white color and add the color to the new step by step, otrimuyuchi color as close as possible to the color of the cover.

Acrylic sealant is used to repair the laminate.

swelling

Such a situation is blamed, as a great amount of native land was poured onto the laminate. Having taken water from the surface pads, we cannot see the water that has penetrated into the sticks between the lamellas. After a couple of years after such a great tread, we can poke the surface of the cover, which is puffed up.

If the filling was large-scale and especially with hot water, then it’s better for everything to take the coat off, dry it and mount it again, and maybe even replace the cover.

Swollen top of the laminate looking unaesthetic

Even though the scale of "dashing" is small, it is enough to pull a sprat of swollen boards and press them down with an important vantage until they hang completely. After 3-5 days when dry, the planks are turned on the floor or bathed and laid on their new floor.

Plyami

Tse, maybe, the widest defect, the building’s exactness to zvnіshnіy zvnіshnіy vglyad statі. The view of the flames is not repaired, but it often leads to significant losses.

The virobnik processes the surface of the laminate with special warehouses, thus protecting the material from the penetration of dirt and water. It is important for him to see the flame once. You can do it for the help of the sizable soft trokha of a vologo ganchirochka.

Bazhano with whips tidy up as soon as they appear

Well, they drank lacquer on the laminate, farba or budіvelnі sumishі, you will have to stop using special methods. So, for example, varnish and farba can be removed by a retailer or with acetone.

Fuck you! Do not allow trivial contact of the laminate with retailers. Not a trace of zusilla rub the surface. After being removed with plaits, it is necessary to carefully wipe the place of the pads with a comb of water, and then with a dry soft ganchirochka or a sponge.

As if you were dropping nail polish on the laminate, you can see it with an additional brush of medium hardness and a small amount of powder. Look at the gum blast, you can see it with a great clerical gum. As if the laminate was splattered with fat, then droplets caught on the back of the head, and then we wipe the surface of the pads with soft ganchirochka, soaked in a special way for the mitt, the dishes.

Looking after laminate flooring

If you have any more defective defects, simply vanish. For whom should follow simple rules:

• do not walk with laminate flooring;
• in your own time cut and sharpen the claws of your creatures;
• put a kilimok on the doorstep, so that you can reduce the amount of wood and the saw that is brought from the streets;
• cover the underside with a special lacquer, which will not only beautify your good-looking appearance, but serve as an additional zahist;
• install special gum overlays on the furniture legs;

Special pads for the bottoms of furniture and used equipment

• unique the great number of natives when choosing.
• when choosing, use special equipment to look after the laminate.

You can look at the video below for the sake of fakhivtsya how to repair the laminate with your own hands.

Video: do-it-yourself laminate flooring repair

Regardless of the large number of buyers who buy natural materials, many of them step by step schilyaetsya at the expense of the laminate on the pidlog - a practical, not so expensive, easy-to-install coating. Laminate power and characteristics may be optimal, in vіdpovіdnі main vomogam pokuptsіv, chim і deserving chimal popularity.

Advantages to laminate

The selection of sublogic covers is a serious food, even though the lining of walls and steles can be repaired through the river or another, or it will be replaced again, and the axis of the sublog is repaired rarely and if it is planned to be re-planned, but not for good, then for a long time. And I want so much that the improvement for the podlog would be wear-resistant, environmentally friendly, safe for health, creating a house that feels warm and calm.

• Laminate board is inert up to high temperature. I put a hot frying pan on it, obviously, not a varto, but from falling on a frying pad with dribbling sparks, hot ashes can’t be left out of a trace. Tsya is the power to allow victorious coverage with a system of warm sub-logs.
• Zavdyaki top zahisny ball laminat filthy skip barniki, zmiti flame in kawi, tea, or navit specks of varnish for nails in a difficult warehouse.
• Laminated underlay practically does not change the color on the plots, where you constantly spend a direct change of sun.
• You can not be afraid of the drive of slides, redundancies after the installation of important furniture, laminate flooring may be high quality.
• Aesthetics, diversity of textures and decor. In living quarters, we most often stick to the decor of underlays and wood or parquet. Ale іsnuє laminat pіd kamіn, marmur, ceramic tile and exotic options pіd shkіru, metal.
• Laying laminate flooring is easy. Installation is carried out in a non-adhesive way, the canvas can be picked up and laid in another place.

What kind of laminate on the basis of choice

When choosing a cover, sublogs give respect to the classification. Fall-bearing from the predbachuvannogo navantazhennya on the sub-log, the laminate is divided into 6 classes:

• Padded laminate - 21, 22, 23 - the first number "2" shows that the laminate is recommended for laying near living rooms;
commercial - 31, 32, 33 - appointments for service, office, trade, industrial applications.

Another figure characterizes the indicator of wear resistance:

• 21, 31 appointments for accommodations in low airspace rooms, where there are no parts of the furniture that are oversewn, so that there is a risk of easy removal of the upper ball (bedrooms, bathrooms, guest rooms, komori or conference rooms, meeting rooms in the office);
• 22, 32 grants for admission with an average coefficient of throughput (children's rooms, ventilators, in offices - working rooms);
• 23, 33 class laminate flooring is installed during the movement of traffic (passage in the corridor, reception halls, in the halls of cafes, bars, halls of hotels). In addition, they are recognized for government purposes, de є risik fall of hospitality or important objects (warehouse, knives, etc.), in rooms with vibrating mechanisms (cleaner, dishwasher) or "roller" furniture.

Service term laminated logs

For the purpose of creating a reserve of mіtsnostі dosvіdchenі koristuvachі to radiate vichity clasifіkatsіyu laminate and take class vishe. And zastosuvannya 31, 32, 33 class at the living houses guarantees an increase in the term vikoristannya at the razi. For example:

31, 32 class laminate "living" on the basis of commercial applications from 2-3 to 5 years, for residential - 10-12;

Laminate class 33 does not use performance characteristics in virobnicheskih, commercial booths up to 6 years, in residential houses - up to 20.

European manufacturers do not bend laminate class 21, 22, 23. As you have seen such a marking, if there are leftovers of a large batch, or a significant addition.

Mіtsnіst pokrittya also lie in vіd tovshchina. For residential use, 6-8 mm is sufficient, commercial laminate can be no less than 8 mm, and more often 10, 12-millimeter coverage is required.

Dominance of the laminate, characteristics, structure

The cover is made up of 3-4 balls, pressed under a strong pressure and at a high temperature:

Zahisniy ball (acrylic or melamine plіvka). Acrylic or melamine - may be non-negotiable components, but the problem is that formaldehyde is used to thicken the resins vicarious, which is seen as unsafe for people. About yogo zmіst virobnik povidomlyaє we will especially mark the marks E0, E1, E2 and so on.

As for the goods on hand, it costs E0, E1, in front of you is a copy, for which the presence of formaldehyde did not show up, or it does not exceed the norm (10 mg per 100g). Sign E2 to talk about vmist 10-30 mg (it's not scary yet, but it's already bad).

Covering E3 markings is not recommended for living quarters, but more so for bad ventilation. The amount of formaldehyde in the new reach is 30 to 60 mg per 100 g of dry speech. It’s not shkidlivo in a normal state, but in times of sleep, the concentration in others is super safe.

Ecological coatings from wood (without zastosuvannya dodatkovyh seepage) may have the value of E1, and coatings from chipboard, MDF do not in any way interfere with the laminate for mixed formaldehyde.

Establish a test of the quality of an environmentally friendly laminate without formaldehyde. For example, such material was developed by ELESGO. According to the results of testing the presence of shkidlih warehouses, it was not revealed (otherwise, their number is less for 0.005!).

Another important characteristic of the sour ball is the presence of corundum. The presence of aluminum oxide gives a good coating, but, unfortunately, it adds more varth.

Another ball – decorative with a paper and put on it with a stable little drukovanim.

The third one, which is to become the head of the comrade of the whole cover, is also called the bearing foundation. We prepare from fiberboard, chipboard, MDF boards, which are scrutinized for the gap. Provides heat, sound insulation, mitznist on evils.

There and then roztashovuetsya and krіplenya, scho to forgive skuvannya okremih elementіv. Locks are built without intermediary on the basis (fibers) or they are made okremo.

Mitsnist of fiber plantation to fallow:

• Vіd tovshchina of the basis (mіtsnіshe krіplenya zabezpechuyut locks on the tovstіy panel);
• The depth of the groove and yoga form;
• The leakage of the edge of the panel and the reinforcement.

On what to focus on the hour of choice

Leakage can be both external and internal (globe). Z'ednannya with internal processing - mucus, creating a reaction to the wet edge. Tear up the lock, and it’s like the surface is covered with a flat one, and if you don’t pick up the hair, you are lucky, you can lay the laminate on the right with the copies, the locks of which have gone through a rough work.

As soon as the time is taken, it will seep, the building will be torn apart in a certain hour, and falling into the grooves of third-party blotches will reduce the strength and water resistance of the seal. Such a laminate of power and characteristics can not be the best, so you can’t say “low”.

Pomilkov's thought that the leakage ensures water resistance. Її the main function is the ease of closing grooves. Every hour of the day, there is a lack of tightness to the castle, helping to creak through the inconsistency of the geometry of the details of the castle. Ale, yakshcho є nedolіki - stench vyyavlyatsya after erasing leakage.

In the rest of the hour, polymer materials began to be victorious for the base. The main thing is water resistance.

Before the waterproof laminate is applied:

• to reduce leakage of HDF panels (allowing two or three years of contact with water),
• elements on the basis of a plastic panel.

Laminate, wood-shaving base, which was replaced with a plastic one, absolutely protected from deformation during long-term contact with water (guarantee for 6 years). This type of coverage can be safely installed not only in water areas, but also there, where you can directly get on the water supply (bath, sanitary vuzol, kitchen).

Advertising chi material from the future? Deyakі virobniki already started selling laminate 34 class, according to their claims, vodіє nadmіtsnіstyu i nadvodostіykіstyu. However, the advertising campaign for products is faster. Shards in the official classification this type of laminate is not registered.

In addition to such markings, the great European companies Praktik, Parafloor, Alloc produce 12-mm laminate from the Brilliant, Glossfloor, AMOAGE, MATflooring collections. The special quality of coverage of these collections is assigned to the 34th class.

Laminate: power, characteristics - video

Irrespective of the road to the repair of the old one, that oldness of the old ones works, to the old materials of the authorities. The tile can “see” through the wall surface, appear on the trellises with commemorative formless patches, and the laminate flooring is covered with a thick cobweb of cracks and streaks of various sizes.

However, regardless of such unacceptability, it is not necessary to be angry, but the majority of defects can be repaired and corrected independently. Vikonati can not repair large-scale repairs.

Most often, among the lists of inaccuracies, it is possible to stick with the weak surfaces of laminated boards, which, consciously, you want to correct, without going into great financial losses. Tse bazhannya can be done, and moreover, you can repair the laminate with your own hands, without the need to irradiate expensive facsimiles.

See ushkodzhen laminate

For the cob, it is necessary to choose the options for the laminate flooring:

- cracks and how much;

- podryapini;

- Swelling.

Similar defects can appear on the laminate for various reasons. Ale schob zdіysniti yakіsnu, zvnі nepomіtnu restoration statіu nіbіbnіnіa vydіbnіnіa pro kaznі vіdnі factorі kozhnoї vadi. It is necessary for the timely application of these destructive agents and the zapobigannya їх infusion after the spent adoption of the poshkodzhen.

Let's take a look at the report on the reasons for the adoption of commemorative ears and the best available ways to adopt them.

Podzhennya defects laminata and methods

Respect! Such a material, like a laminate tile, is completely resistant to all physical and mechanical properties. Ale, if the installation was vikonuvavsya with obvious ignorance of the technological process, or if the operation cleared up the unbalance of the settings to cover, it starts to droop, accumulating defects that have appeared, with a skin day!

Again, let's analyze some of the wadis.

Cracks and chips on the laminate

There are also wider defects in the surface of the laminate, which in the main fall of important objects should be high (deposit in the mass of the object).

Read also: Fireplace plaster (photo): warehouse, see, application rules

Clean up the cracks as much as, in principle, awkwardly. For a successful result, you will need a special sum of money for restoration and repair. Such a warehouse is filled with sparsely scuffed, cracked ones, as if behind the help of a rubber spatula. If the sum is applied too much, then if it is applied, it is necessary to see the excess mitte with a clean, dry ganchirka. The repair warehouse is left on passive drying. Buvayut fluctuations, if you sum trohi osida after hanging and schob pіdkoryguvat її riven, it is necessary to repeat the process again until the ok_snoї іvnoї surfn_ is taken away.

It is permissible to replace the special warehouse with another material - acrylic sealant. In this case, it is recommended to buy a white or prozor sealant. When adding to the new small portions of the same type of color, it is possible to reach the optimal contrast effect with the color of the laminate.

Undercut on laminate

Among the most possible defects in the laminate flooring (and other options for hard flooring), such a low level is in the lead. The stench be-like a mit can appear on the surface.

The main causal factors їх viniknennya є:

- Zhіnochi pіdbori;

- Particles of solid stone (sand, shavings, broken components of the wall and stole lining thinly);

- Rearrangement of furniture;

- domestic lovers.

For intensity, the undercoats are subdivided into deep and superficial wadis. The power remains to grow in width and to be buried for the daily life of the people who enter at any time. At the undercoat, zabrudnyuyuchi parts are clogged, and they eat the vologda. Such a combination helps to grow a defect, but despite such a trend, it is easy to deal with them.

Tackle it more quickly for the help of a special security, which is called a wax olive. It is possible to find such olives in budіvelnih shops without difficulties, smut - tse pіdіbrati maximally vіdpovіdny to the laminate, what to repair, color and tone.

Do-it-yourself laminate repair technology is as follows:

- On the prepared, cleaned surface of the skin underwear, apply a small amount of wax oil;

- the area is overgrown with passive drying;

- finishing manipulation will be polishing the surface for the help of soft ganchir.

Read also: Why does the bathroom smell like a sewer: what causes it and how to sleep

With such a trick, you can put it on whether you are wearing a napkin on a laminate. Here it is important not to accumulate a large number of defects, at the same time fixing them, but to follow up for more preventive visits.

Panels between laminated planks

Molding that expansion of the space between the laminated planks can be, if it is. The most common reason for this is the inaccurate laying of the sub-logic cover on a filthy prepared basis (nervousness, smittya, differences evenly). As a result, on the cob of active exploitation, the laminate begins to look at the cover, dramatic creak i, troch pіznіshe, diverge at the intertile seams. This is the reason for the distortion and the bending of the surface underlays.

With such a scheme for fixing defects in the repair of gaps, the next steps are carried out for additional sealant, shards of wax olives are absolutely powerless here.

Recommendation! If it is necessary to cover the grounds on the great square, the shortest option for repair will be the all-season replacement of the “suffering” litter. When assembling in any way, it is necessary to use self-tightening screws and special glue to make the material more stable to the material!

Swelling of the laminate

Situations are trapping, for which there are great spills of water on the slopes. Cause zovsіm raznі behind your dzherel. Tse can be children's fun, piercing pipes, shed when collecting water and other possible options for getting into the water overdose.

It seemed to me that it is necessary to take the water quickly, and to dry it out on a passive drying. However, often people do not suspect about the further development of the undergrowth - after a couple of years, the wooden base of the laminated leaves begins to swell, in the field of vology, which has leaked.

The situation, obviously, is unacceptable, and the first thought in any case is only one - the re-dismantling of the worn-out coating and the laying of new material. Ale with the implementation of such a scenario, do not hurry up, the fragments of the defects that have been established, often go right to correct.

It is necessary to pull out of the underlayment cover of wood, swelled tiles and spread them under an important press on a flat, hard surface. Approximately in five days, the deformed planks swell into a cob configuration, after which they are next to turn on a large scale.

Laminate - covering for pіdlogi z kіlkoh balls of fibrous material (often vicorist paper), seepage melamine resins. Previously, such material appeared in 1909 in Pittsburgh and was victorious as an insulator for electrical wiring.

Since 1920 Westinghouse Co. she began to vibrate the leaves from the bagatospheric paper and beat them like a stylist. And the axis of the first pіdloga z laminatu appeared in less than 80 years in Switzerland. At the same time, the youngest material for underwriting and borrowing less than 10% of the total underwriting market.

Some people call it laminated parquet, although there is nothing to stink of. Because the parquet is made from natural wood and is not laminated, but covered with a thin ball of special varnish.

Characteristics of the laminate

Laminated pidlogovoe pokrittya represented by anonymous companies and firms. Powerfulness and characteristics are easy to please with any relish and fit to be the most successful interior.

This article gives you more power, characteristics and classification of the laminate, to the one that the leather class has its own, the power is less to the class of specialness.

The range of laminated panels, which are called laminate in professional stakes, can be different - the length is not more than 1.5 m, and the width is up to 0.25 m.

The structure of the laminate

The wine itself is similar to a leaf cake, which is made up of 4 glued balls:

1. The lower one - unrefined or tarred papers do not let the water through. Stabilize and protect the main ball. Maybe mother dodatkovu zvukoizolyatsiyu chi autonomous lining.
2. The main ball is a village fiber pressed into a slab. The most important of all balls, that is the main one. The standard thickness is 4 - 6 mm, є variant with the thickness of the main ball - 8 mm. This ball is on the panel of hardness and clear form. The new one has a happy groove and a thorn.
3. Decorative - special paper, on which the application of little ones imitating wood or furniture foil. The little one can be just like: the structure of various wood species, marmur, sand, wooden parquet is thin.
4. The top ball is made of melamine or acrylic resin, which protects against abrasion. Possibly from 2x - 3x balls, there are more balls and more exploitative power.

The class of the virobu is assigned to the upper ball itself.

Classification of laminate

Laminated panels are divided into classes in a fallow way, like a stink. The panels go through 18 test tests: light resistance, wear resistance, durability up to sagging, impact resistance thin.

After passing all the tests, the laminate will take the class from 21 to 34. 21 - 23 - for home victoria, 24 - 34 - commercial. Today, commercial-class panels are often vicorated in home minds.
Below is a table with a description of the classes of laminated panels for the sublog:

Today laminate flooring is gaining more and more popularity, which is not surprising. Aje wine may have a good resistance to navantage and a three-dimensional term of exploitation.

The quality of the material as a whole is available and at a price, lower than the processing of natural wood (parquet).
Average prices vary from 240 to 500 rubles per square meter and lie down according to the class, the edge of the virobnik.

Choosing the correct cover for your booth, do not forget about the following characteristics:

Water resistance

As a laminate, it is water-resistant, it is the fault of the mother of greenery (as water-resistant drywall). Such a material is used for the production of a high-water environment - a bathroom, a kitchen.

To avenge the speech, as it protects against the appearance of a fungus, and the core of the panel is streaked with speech, which changes the water treatment. Butt of a waterproof laminate - Kronoflooring and Egger made in Germany.

Water resistance

The waterproof laminate is vibrated with a pressure path under a high vise. Thus, you can see the great flooding for the rahunok of the water sealing of the seams (there is a hot whisk), adding to the warehouse of the wooden saw and some other secrets, with which the pickers do not share.
Manufacturers of waterproof panels can be touched on the fingers: the German company - Witex and the manufacturer from Norway - Alloc.

Environmental friendliness

The technology for the selection of coatings that can be laminated is such that one cannot go without phenol-formaldehyde resins. Therefore, before buying a cover for the purchase, you should check the hygienic certificate for the product and check with the seller of the chemical warehouse for the laminate. Vmist phenol is not guilty of butichim - 0.003 mg per cubic meter, and formaldehyde is not more - 0.01 mg.

Warranty

The guarantee extends to the upper ball and is tied to the class and the accommodation, in which case you will be bedded. If you want the laminate to serve faithfully and faithfully for 15 - 20 years, beat 32 class (guarantee 15 - 20 years) for the kitchen and rest, and to decide on the application, beat 31.

If you want to make a bed and forget it, then you will need material with a pre-warranty, but this option will cost twice as much. Such cover is only issued by the Norwegian company Alloc.

Take a look at the video: HOW TO CHOOSE THE LAMINATE!? (Secrets to choice) ...

Laminate is often worn in modern apartments, so as it is to them, as if they were in their own house, they have a good look and low varity. The success of yogo in porivnyannі s linoleum shchey and in case of the appearance of any defects, they can be overcome by a simple replacement of the okremoy doska. What are the most widespread defects and can be caused by a laminate?

Other defects

To other defects, such ushkodzhennia can be considered: undercutting in furniture, burning out in the face of underburning, indentation in the vise, if it is thin. You can use kіlkom in the following ways:

Great defects

As if on a laminate, a lot of scraggly men have settled down, a great flame is burned away, then. those defects, if it is already impossible to correct them in the ways described above, it is possible to change the damaged elements, even if the okremі doshka, you can come by the piece. Ale pіdloga z laminatu fit hoch і z piece elements, аle z vikoristannya tongue-and-groove system, yak is not recognized for selection. For this, a few ways have been found to carry out repair work in such a way that it does not mess up the repair.

Yakscho Poshkodzhen part to be located nearby, then the best option would be a private selection of cover. For the cob, it is necessary to dismantle the plinth: it can appear in such a way that the technological gap between the walls and the wall is lost, then it will be necessary for a grinder or a chisel. Then we carefully take the first plate, with which it is important not to damage the lock, but dismantling the plate more than signing, so as not to confuse them when folding. We choose the cover to the next month, change the old doshka for a new one and choose the cover, after which the plinth is installed. This is the best way, which will help you to be careful.

Yakscho poshkodzhena dilyanka roztashovana closer to the middle of the kіmnati, then the zavdannya folds up, the shards viynyat okremy element, tying with locks with others, and with nothing to mess up, it’s easy to do it. For the one in the middle of the poshkodzhenoy panel, it is straight-cut in the end: then, according to the lines of the miniscule, or with a chisel, it is vipilyuemo yogo and neatly viymaemo, with which it is easier to cut through the panel in some places more beautifully to the castle itself: it will be easier to viymati. The plinth, which is installed across the panels, needs to be dismantled, and the panel itself should be removed to the wall until it stops. Now everything is cleared, we remove the chamfer from the lock, and on the new doshtsi, the lock is often lifted, approximately by a third. Now we smear the edges on the bottom with joiner's glue and carefully place a new board in the opening, and in order to reach a good fit from the sides, you need to lift one of the side panels with a vacuum handle. Now it is necessary to lift the plate from the wall in the normal position and it is enough to glue the whiplin at 30, moreover, it is necessary to beat the vacuum handles for the last day.

Significantly, the most important thing is to repair the laminate of the middle and high price categories, so that more cheap ones can not be dismantled and dismantled.